Find Powder Curing Oven, Powder Drying Oven, Powder Coating Oven on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
automatic powder curing oven
Home > Products > Spiral Heat Exchanger > automatic powder curing oven

automatic powder curing oven


  • automatic powder curing oven
  • automatic powder curing oven
  • automatic powder curing oven
  • automatic powder curing oven
  • automatic powder curing oven

automatic powder curing oven

    Payment Type: T/T
    Terms of Trade: FOB
    Min. Order: 1 Set/Sets
    Delivery Time: 45 Days
    Packaging: wood box
    Productivity: 15
    Brand: HENGYIJIA
    Transportation: Ocean
    Place of Origin: SHENZHEN
    Supply Ability: 5
    Certificate: ISO
    Port: SHENZHEN

Basic Info

Model No.: HYJ-523

Product Description

In electrostatic powder coating, the curing oven is a relatively important device, and the quality of the film has a very important relationship with the temperature of the curing oven. In the heating mode of the powder curing furnace, it can be divided into two categories: one is hot air circulation type, and the second type is infrared radiation heating method.

The hot air circulation heating type can be divided into direct heating and indirect heating. There are two kinds of heat sources for direct heating, electric heating spiral fin type and gas type direct heating method. The advantage of direct electric heating spiral fin type is that the temperature inside the furnace is uniform and the workpiece adaptability is strong: the temperature is adjusted by the solid state relay PID, and the temperature deviation in the furnace is small. The disadvantage is that the heating time is slow and the equipment power is large. Because it is heated by hot air circulation, the curing process is liable to cause secondary pollution of dust. The stove has a large area.

The advantages of the gas-fired direct heating method are rapid heating rate, high heat energy conversion rate, and the furnace temperature control adopts proportional adjustment control. The temperature control deviation in the warm furnace is small, because the burner flame directly burns in the combustion chamber, so the curing process is easy to cause For secondary pollution of dust and exhaust gas, a high-temperature resistant filter should be installed in the heating chamber. Therefore, the full pressure of the circulating fan should be considered larger in the selection of the fan. In addition, the stainless steel plate must be used to heat the indoor plate. Increase, the furnace covers a large area.

Two indirect heating methods Indirect heating of two types of fuel oil. The characteristics of indirect combustion heating method, there must be a heat exchange device, the terminology is called Heat Exchanger, the flame of the burner is burned in the furnace of the heat exchanger, so the material of the heat exchanger should be made of heat-resistant stainless steel (usually SUS310S) Material thickness can not be less than 5mm), the advantage of indirect heating method, because the burner flame burns in the heat exchanger, so that it will not cause secondary pollution of dust and exhaust gas during the curing process, the temperature is uniform, and the temperature control can adopt two-stage fire control and Proportional adjustment control. The control temperature is relatively accurate. The disadvantage of the indirect heating method is that because of the heat exchange through the heat exchanger, the thermal efficiency is lower, the installation cost is relatively high, and the furnace covers a large area. Infrared direct heating can be divided into far infrared and high infrared. Far-infrared heating is well known to the world. When the radiation spectrum of the far-infrared heating element is the same as the absorption spectrum of the heated workpiece, the thermal efficiency is the highest, thereby achieving energy saving. The advantage of the far-infrared heating method is that the radiation spectrum directly absorbed by the powder during the heating process causes the powder on the surface of the workpiece to rapidly solidify. The furnace has a small footprint, but the furnace temperature uniformity of the far-infrared heating method is not good, so the current design is solved by the circulation fan stirring method.

The radiation spectrum of the heater during high-infrared heating is absorbed by both the workpiece and the powder, so that the workpiece and the powder are simultaneously heated, so that the powder is solidified faster, thereby saving energy. The general high-infrared heating products are mostly made of glass, which is easy to damage during installation. The high infrared heater has a short life span, and its working life is about 5,000 hours to 8,000 hours

Powder Coating Machine 2Powder Coating Line 2Powder Coating LinePowder Coating OvenPowder Coating Equipment

Shenzhen Heng Yi Jia Technology Co., Ltd.

 

Our History

Shenzhen Heng Yi Jia Technology Co., Ltd. has focused on paint spraying equipment for over20 years in China. We started as a small operation, but now have become one of the leading painting line suppliers in the coating industry in China.


Today,Shenzhen Heng Yi Jia Technology Co., Ltd. has been one of the top producers of quality automatic spraying line and new technologies, such as: automatic paint spraying line, UV paint spraying line(uv lines), spray chrome line, mini auto painting line, spray chrome equipment and accessories of coating equipment of vacuum metallizing machine(metallizer), Automatic UV plating vacuum line, spray booth, coating chain, UV curing oven, automatic spray chrome equipment&line, spray powder coating line & equipment and so on.


Our factory

Shenzhen Heng Yi Jia Technology Co., Ltd. is located in the China The beautiful coastal city-Shenzhen. As a global supplier in auo paint spraying line, UV paint spraying line, mini auto painting line, spray chrome line, spray chrome equipment and accessories of coating equipment. Heng Yi Coating Technology is to create added value for customers around the world.

Our product

Our products includes the following:

1, Automatic paint spraying line

2, UV paint spraying line

3, Mini automatic paint spraying machine

4,small automatic spray coating machine

5.UV spray coating line

6. automatic spray painting line

7.Industrial tunnel oven

8.Fixed oven

9.UV curing machine

We supply coating products all over the globe to a wide range of companies worldwide, ranging from large multinational organizations to small individual companies.

Product Application:

Spray painting plant for Industry use are widely used in the following industry, such aspackage coating plant:

--- Glass packages coating for cosmetics, perfume, wine, caps, bottles and other parts

---Painting plant for product paint surface finishing

---Vacuum coating plant

Spray chrome equipment with formula which from our second production line, are widely used for cmetallzing oating, and vacuum coating machine etc.


Our certificate:

We always feel that all success of our company is directly related to the quality of the products we offer. They meet the highest quality requirements as stipulated in ISO9001, ISO14000:14001 quality control system, CE certificate, etc.


Production equipment

We are capable of mixing and producing an paint spraying line, UV lines and offer some of the most advanced manufacturing capabilities available, including vacuum coating machine, mini paint spray machine and spray chrome machine etc.

Production market:

We have customers from both domestic market and oversea market.Heng Yi Jia Technology Sales managers can speak fluent English for good communication. Our main sales market:

China : 50%

USA: 10%

Spain:5%

Thailand:3%

Singapore:2%

India: 20%

Our service for coating equipment.

Besides our existing molded spray painting line, auto paint spray line, uv paint line, mini paint spray line, spray chrome machine, also can produce other coating line according to the drawings from our customers. We control the product quality critically for every step during the manufacturing from custom coating equipment. We offer technical support that is second to none. installation at local.









Company Info
  • Company Name: Shenzhen Heng Yi Jia Technology Co., Ltd.
  • Representative: Wu Juhua
  • Product/Service: Powder coating machine , Automatic Spray painting coating Line , UV Coating machine Line , small automatic spray coating machine , tunnel oven , semi-automatic spray coating line
  • Capital (Million US $): 50万
  • Year Established: 2016
  • Total Annual Sales Volume (Million US $): Below US$1 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 5
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: No.2 Street 5 Lao Keng Industrial Zone Keng Zi Shenzhen China
  • Contact Person: Ms. Demi Wu
  • Tel: +86-755-29492864